Hologram at GITEX: What Works on Your Stand and What Doesn't
Planning a hologram for your GITEX 2026 stand? What pulls visitors in, what gets walked past, and how to plan a HoloBox at the new Expo City venue.
GITEX Global 2026 opens with the summit on 7 December at Dubai World Trade Centre, then the expo runs from 8 to 11 December at its new home, Dubai Exhibition Centre in Expo City Dubai. The 2025 edition brought together more than 6,800 exhibitors from around 180 countries. That is a lot of stands competing for the same visitor walking down the same aisle.
A hologram display on your stand still stops people. But after several GITEX editions, a person inside a glowing box is no longer new on its own. What decides whether visitors stop, stay and leave their details is what the hologram does, where it stands, and who takes over when the conversation gets serious.
Here is what we have seen work on exhibition stands, and what we have seen fail.
What works
A character with a job to do
The strongest setups give the character a role on the stand: host, greeter, quiz master, guide. Visitors respond to someone who speaks to them, not to a clip that plays whether they are there or not.
At GITEX 2025 we built an interactive quiz with a virtual host for Fujairah Digital Government on an 86" HoloBox. The host was built from footage of one of their own staff. She welcomed visitors in Arabic and English, asked the questions and told each participant their result. The stand team managed and approved the questions from an admin screen, so the content stayed theirs.
A quiz works well at GITEX because it has a clear start and end, takes a couple of minutes, and gives your team a natural moment to step in when it finishes.
An AI avatar that answers from your approved content
A 3D AI avatar inside the HoloBox can listen to a visitor's question and answer by voice, live. The key is what it answers from. We build these on the content the client approves, so the avatar stays on your products, your services and your messages.
For Dubai Charity Association we built Ahmed, a 3D character with Emirati features on a 75" HoloBox, answering in Arabic, English and Hindi from the association's approved sources. For the Ministry of Justice in Abu Dhabi we built Khalid on an 86" HoloBox for the UAE Hackathon at TDRA, speaking Arabic, English, Hindi and Urdu.
GITEX visitors come from everywhere, so languages matter. Just as important: decide in advance what the avatar says when a question falls outside its content. The right answer is to say so politely and point the visitor to a member of your team. If you want to understand how these characters are built, read how an AI hologram avatar is built.
A real person, live, from somewhere else
Your CEO is in another country during show week, or your product expert is at the summit at DWTC while the stand is at Expo City. With live two-way telepresence, that person appears inside the HoloBox at close to real size, sees and hears the visitor, and talks back. It works best as a scheduled moment ("meet our CEO at 2 pm") rather than all day. More on this in our guide to life-size human holograms.
Facing the aisle, at the front
Placement does as much work as content. The HoloBox should face the visitor flow, near the front of the stand, with two to three metres of open floor in front for people to stop without blocking the aisle. On the Fujairah Digital stand, the unit was the first thing visitors saw, and the quiz started there.
What doesn't work
A looping brand video in a box. If the content is the same video you would play on an LED wall, you have rented an expensive screen. The format earns its place when someone inside it talks to the visitor.
One language only. An English-only character at GITEX loses a large share of the Arabic-speaking visitors, and the reverse is also true. Arabic and English is the minimum; add more if your target buyers need them.
The unit in a corner or against the back wall. Visitors in the aisle cannot see it, and the crowd it draws ends up blocking your own stand.
A spotlight above it. The HoloBox builds depth through contrast. Strong light aimed at the front washes out the image. Agree the lighting plan with your stand builder before build-up.
Relying on hall Wi-Fi. Pre-recorded content runs offline, but AI avatars and live telepresence need a stable connection. Order a wired line from the organiser. Public Wi-Fi at a show this size gets congested at peak hours.
No one to take over. The hologram opens the conversation; your team closes it. Freeman's 2025 trends research found that building vendor relationships was the top "peak moment" attendees reported, and that attendees who had a peak moment were 85% more likely to return to the event. A character that hands a warm visitor to a salesperson, or ends the quiz with a lead form, gets you that relationship. A character with nobody behind it gets you a photo.
Swapping in a hologram fan to save space. A fan spins a bright graphic and suits a logo, but there is no person to talk to and it needs a guard around the blades on a busy stand. We compare the two in HoloBox vs Hologram Fan.
Which size fits a GITEX stand?
- 86": the unit is about 128 cm wide and 222 cm tall, and shows an adult at close to real size. Best for a host, a live CEO, or a stand where the hologram is the main attraction.
- 75": a good balance for mid-size stands, as with Ahmed.
- 65": for tighter stands, or when you are showing a product more than a person.
The full breakdown of space, power and lighting is in our HoloBox size and installation guide.
Planning for the new venue
GITEX 2026 is the first edition at Dubai Exhibition Centre, so do not assume what worked at DWTC applies. Ask the organiser early for:
- Door heights and lift sizes on the route from the loading bay to your hall. The full-size unit is about 222 cm tall.
- A dedicated power point at the unit's position.
- A wired internet line if you are using AI or live telepresence.
- Build-up and dismantling times, and crew access passes.
If you also plan a telepresence moment at the summit at DWTC on 7 December, treat it as a separate venue with its own technical checks.
Plan the content before the hardware
The device is the easy part. What takes time is the content: designing a custom character, writing and approving the material the avatar answers from, recording in each language, and testing it in a noisy room. Content approval is usually the slowest step, so start there.
You can rent a HoloBox for the show days, or buy one if you exhibit at several events a year and want to use it in your lobby or showroom between shows. See hologram rental in Dubai for how rental works.
The takeaway
At GITEX, a hologram works when it has a job, speaks your visitors' languages, faces the aisle and hands people to your team. It fails when it is a video in a box with nobody behind it.
To see the devices and characters, browse our HoloBox solutions for a hologram in Dubai and our exhibition display technology. If you are still weighing other formats, read when AR and VR earn their place on a stand.
GITEX build-up comes quickly. Send us your stand plan and what you want visitors to do, and we will suggest the right size, placement and content for your stand.

